Lost Mary BM600 Prefilled Pod Vape Kit

Rechargeable Lost Mary BM600

The Lost Mary BM600 vape kit is the rechargeable prefilled pod kit that replaced the original BM600 single-use bar after the June 2025 UK ban on disposable vapes. It keeps the same compact shape, the same MaryLiq 20mg nic salt e-liquid, and the same approximately 600 puffs per pod, but charges via USB-C and clicks in a fresh pod when the e-liquid runs out instead of binning the whole device. The BM600 sits at the entry point of the Lost Mary rechargeable kit lineup and is the closest like-for-like to the disposable that vapers grew up on. It is inhale activated, has no buttons, no screen and no settings, and is built around a 2ml prefilled pod with a built-in mesh coil and a 750mAh kit battery.

Vapers also know this kit as the Lost Mary 600, Lost Mary BM 600 or Lost Mary vape 600 - all the same Lost Mary pod kit running around 600 puffs per pod. This page covers the BM600 kit body itself - the device, the battery, the LED behaviour, set-up and charging. For the full flavour roster and pod refill packs, head to the BM600 refill pods collection. For the wider Lost Mary lineup including the BM6000 auto-refill, Nera 30K and Hawcos Crystal 600, head to the Lost Mary brand hub.

BM600 Kit Specifications

Hardware specs for the Lost Mary BM600 prefilled pod vape kit. Figures pulled from the manufacturer and verified against the device.

How the Lost Mary BM600 Pod Kit Works

The Lost Mary BM600 disposable vape predecessor was discontinued in June 2025; this rechargeable pod kit is the legal post-ban replacement and is what UK shoppers searching for the Lost Mary disposable pod BM600 land on today. The BM600 is a closed prefilled pod system - it is not a refillable open-tank kit, so there is no e-liquid bottle to fill the pod yourself. The 2ml pod ships pre-loaded with MaryLiq 20mg nic salt e-liquid and a mesh coil sealed inside, so there is no priming wait beyond a few seconds of soak time, no coil to thread in, and no e-liquid to handle. The kit is inhale activated - draw on the mouthpiece and it fires. There are no buttons, no temperature controls, no airflow rings and no menu to navigate. When the LED on the bottom of the kit body flashes three times, the battery is low and needs a USB-C charge. When the pod runs dry, it slides out of the top and a fresh pod clicks in.

Setting Up the BM600 Vape Kit

1. Open the box and lift out the BM600 kit body and the prefilled pod
2. Pull the silicone plug off the mouthpiece of the pod
3. Peel any stickers off the bottom of the kit body
4. Slot the pod into the top of the kit - the magnets pull it into place
5. Wait a few seconds for the mesh coil to soak in MaryLiq e-liquid
6. Draw on the mouthpiece - the device is inhale activated, no buttons
7. When the LED flashes three times, plug in a USB-C cable to charge
8. When the pod is dry, pull it out and slot in a fresh pod

The BM600 comes ready to vape straight out of the box. No coil install, no e-liquid mixing, no setting changes. The first pod ships in the kit so the device is good to use the moment it arrives.

BM600 Battery Life and USB-C Charging

The BM600 runs on a 750mAh built-in rechargeable battery, charged through the USB Type-C port on the base of the kit body. A USB-C cable is not included in the box - any standard USB-C cable works for charging, so most vapers already have one to hand. From an empty battery the BM600 typically reaches a full charge in around 30 minutes at 5V/2A, though wall adapter output and cable quality both affect the figure. The battery is designed to outlast a single 2ml pod, so most vapers charge the kit when a fresh pod goes in.

The kit body's battery is removable at end-of-life for responsible disposal. Take the device to a UK vape retailer with battery recycling or a WEEE recycling facility - the lithium-ion cell is recovered and the plastics handled to UK waste regulations.

LED Battery Indicator Reference

The LED light sits next to the USB-C port on the bottom of the BM600 kit body. It confirms battery status at a glance during vaping and during charging.

BM600 Pod Fitment

The BM600 kit only accepts Lost Mary BM600 pods - it is not cross-compatible with BM6000 auto-refill containers, Hawcos pods, Nera 30K pods, or any other Lost Mary pod format. Each pod is a 2ml sealed unit with the mesh coil built in, magnetically slotted into the top of the kit body. For the full flavour roster, multipacks and live stock, head to the BM600 refill pods collection.

BM600 Flavours

The BM600 ships in 20+ MaryLiq flavours - fruit, ice menthols, dessert and cola profiles - all at 20mg nic salt and all built on the same mesh coil format. The Lost Mary 600 flavours line mirrors the original bar catalogue, so users searching Lost Mary BM600 flavours or Lost Mary flavours 600 find the same recipes ported over as prefilled pods. The variant selector above lists which flavour comes with each unit. The full live flavour list lives on the BM600 pods collection.

[FLAVOURS_SECTION]

BM600 vs BM6000 - Which Lost Mary Kit Is Right

The Lost Mary BM600 and the Lost Mary BM6000 are different kits with different refill mechanics. The BM600 is the bar-replacement entry kit - a 2ml prefilled pod that swaps out when empty, around 600 puffs per pod, MTL / RDL. The BM6000 is the next step up - a prefilled pod plus a 10ml auto-refill container that one-way refills the same pod through a valve, giving roughly 6,000 puffs from one pack without ever swapping pods mid-stream.

Pick the BM600 for the familiar bar shape, lowest entry price and zero learning curve. Pick the BM6000 for fewer pod swaps and more puffs per refill purchase. Both kits run MaryLiq 20mg nic salt and both use mesh coil pods, though the pods are NOT cross-compatible between the two kits.

Lost Mary BM600 Day-to-Day Use

The BM600 is built for vapers who want a pocket-sized rechargeable that handles a full day without fuss. A single 2ml prefilled pod gives up to approximately 600 puffs per pod - this is the 600 puff Lost Mary pod kit that customers shopping for a Lost Mary 600 puff or Lost Mary 600 puffs vape end up with, and the "BM600" name itself is shorthand for the 600 puff per pod yield - with actual pod life varying by draw length and how heavily the kit is used. The compact body shape matches the original BM600 single-use bar, slipping into a pocket without bulk. The mesh coil pulls flavour evenly from first puff to last and the MTL / RDL draw is loose enough for ex-smokers but tight enough for vapers who prefer a focused mouth-to-lung hit.

Pod swapping on the BM600 Lost Mary kit is a single-step action - when the e-liquid runs dry, the old pod pulls out of the top and a fresh pod clicks in. No spare e-liquid bottles to carry, no coil to change, no priming wait beyond a few seconds for the mesh coil to soak. For vapers stepping across from the BM600 single-use bar, the prefilled pod kit is the closest day-to-day experience without the ongoing waste of binning whole devices.

BM600 Troubleshooting

What's in the Lost Mary BM600 Box

• 1 x Lost Mary BM600 kit body (750mAh built-in rechargeable battery)
• 1 x 2ml prefilled pod (MaryLiq 20mg nic salt, mesh coil)
• 1 x User Manual
• USB-C cable is NOT included - any standard USB-C cable works for charging

Pros and Things to Know Before Buying

• Pro: Pocket-sized form factor matching the original BM600 single-use bar shape
• Pro: Same MaryLiq 20mg nic salt e-liquid and flavour roster as the bar
• Pro: Mesh coil delivers consistent flavour pod to pod, no coil swaps
• Pro: Cheapest entry point into the Lost Mary rechargeable kit lineup
• Pro: USB-C fast charges in around 30 minutes from empty
• Pro: Removable battery at end of kit life for WEEE recycling
• Things to know: USB-C cable is NOT included in the kit box - any standard cable works
• Things to know: BM600 is 20mg nic salt only - for 5mg or 10mg strengths, browse the Lost Mary nic salts range
• Things to know: Pods are sealed at the factory, not designed for manual e-liquid topping up - swap the whole pod when the e-liquid runs out
• Things to know: Puff count is approximate and varies with draw length and individual usage