Lost Mary BM6000 Prefilled Pod Vape Kit
Lost Mary 6K Vape Kit
The Lost Mary BM6000 vape kit is the rechargeable, prefilled pod system that replaced the original single-use BM6000 disposable bar withdrawn from UK shelves on 1 June 2025. Vapers also call it the Lost Mary 6000, Lost Mary 6K or BM6000 Lost Mary - all the same kit, paired with a 1000mAh USB-C battery in the signature blue and yellow body, a sealed 2ml prefilled pod and a separate 10ml auto-refill container. As you vape, the 10ml container feeds the pod through a one-way valve, refilling it automatically until the supply runs out. One pack delivers up to approximately 6000 puffs (the BM6000 name reflects the 6000 puffs per refill pack) at 20mg nic salt, with 10mg stocked on a limited selection of flavours for users stepping down. The blue and yellow signature colourway is unique to the BM6000 line and is what Lost Mary search traffic recognises at a glance.
The BM6000 is the post-ban compliant successor to the disposable bar - the kit itself is not being withdrawn, it is the legal rechargeable replacement. This is a prefilled pod platform, not a refillable open-system kit. Pods cannot be manually topped up with bottled e-liquid; the auto-refill container is designed to feed the matched pod inside the same pack. When the pod and container are spent together, you swap the whole refill pack for a fresh one. Browse the Lost Mary BM6000 refill range to pair refills with this kit. For the wider hardware family, see the Lost Mary vape collection.
BM6000 Kit Specifications
Specification |
BM6000 Kit Detail |
Battery capacity |
1000mAh rechargeable, USB Type-C |
Display |
OLED front screen, live battery percentage readout |
Pod capacity |
2ml prefilled pod, UK TPD compliant |
Auto-refill container |
10ml separate container, one-way valve feed |
Total e-liquid per pack |
12ml combined (2ml pod plus 10ml container) |
Puff yield per pack |
Approximately 6,000 puffs at average draw style |
Coil |
QUAQ mesh coil at 1.1 ohm, built into every pod |
Nicotine strength |
20mg nic salt across the range, with 10mg on selected flavours only |
E-liquid base |
MaryLiq nic salt, approximately 50/50 PG/VG |
Activation |
Inhale activated, no buttons or fire keys |
Body colourway |
Blue and yellow Lost Mary BM6000 signature |
Charge time |
Approximately 30 to 45 minutes from empty via USB-C |
Cable included |
No, any standard USB-C charging cable works |
How the BM6000 Auto-Refill System Works
The auto-refill mechanism is what sets the BM6000 apart from a straight prefilled pod kit. Every refill pack ships with two parts: a 2ml prefilled pod with a QUAQ mesh coil inside, and a separate 10ml container of matching MaryLiq nic salt. The container has a sealed one-way valve at the base that locks onto a port on the pod. As e-liquid in the pod runs low, capillary action and gravity draw fresh liquid from the container down into the pod, refilling it automatically while you vape.
You do not fill the pod yourself, and the container cannot be topped up with bottled e-liquid. The container is factory-sealed at the matched nicotine strength and flavour, and the valve only opens once mated with the pod port. This keeps the workflow as simple as a single-use bar (clip on, vape, discard the spent pack together) while delivering the puff count of three or four standard 2ml prefilled pods per pack. When both the pod and the container are spent, the whole pack swaps out for a fresh one.
Charging the BM6000 and Reading the OLED Display
The Lost Mary BM6000 charges via USB-C on the base of the kit. Plug any standard USB-C cable into the port and connect to a 5V phone-grade charger; avoid fast-chargers above 2A as the 1000mAh cell does not need them. A full charge from flat takes approximately 30 to 45 minutes. The OLED display on the front face of the kit lights up while charging and shows the battery percentage climbing in real time, so there is no LED-flash code interpretation to memorise.
Once charging is complete the OLED reads 100 percent and the screen will dim or sleep. Unplug, take a draw, and the kit responds immediately. The OLED screen is the BM6000 feature experienced users tend to flag first; rather than guessing battery state from coloured LED flashes, you see the exact percentage every time you draw on the kit.
BM6000 Pod Fitment and Refill Compatibility
Lost Mary BM6000 pods are platform-specific. They do not cross-fit with the BM600, the Nera 30K, the Pro Max 7000, the Hawcos Crystal Pro, the Tappo, or any other Lost Mary kit. The same goes the other way - those kits use their own pod platforms and are not compatible with BM6000 refills. The 10ml auto-refill container is part of the same matched pack; it is not designed to feed a different pod.
To restock this kit, see the dedicated Lost Mary BM6000 refill collection where every BM6000 flavour ships as pod plus matched 10ml container in one pack.
Flavour Range on the BM6000 Platform
The BM6000 launched with 41 flavour SKUs across fruit, ice, menthol, classic, and drink-inspired profiles - this is the Lost Mary 6K flavours catalogue, mirrored from the original BM6000 single-use bar. The lineup mirrors the original BM6000 single-use bar so users moving across from the pre-ban product find the same flavour they were on. Select the flavour from the variant dropdown above, or scroll to the flavour grid lower down this page to browse by image.
On Lost Mary nicotine content questions: the standard BM6000 nicotine content is 20mg nic salt, with a limited selection of flavours also stocked in 10mg. Stock varies by flavour; out-of-stock variants will appear greyed in the dropdown. For users planning to step nicotine down further, the lowest-strength route is bottled Lost Mary 10ml nic salts at 5mg paired with a refillable MTL pod kit; the BM6000 platform itself runs at 20mg across the full range, with 10mg available on selected flavours only.
[FLAVOURS_SECTION]
BM6000 vs BM600 - Picking the Right Lost Mary Kit
The BM6000 sits in the middle of the current Lost Mary rechargeable kit range. The compact BM600 prefilled pod kit targets approximately 600 puffs per pod, a 750mAh battery, and one 2ml prefilled pod per pack with no separate refill container - simpler, smaller, and lighter on the pocket per session. The BM6000 steps up to approximately 6,000 puffs per pack, the 1000mAh battery, the OLED display, and the 10ml auto-refill container. If you used the original BM6000 single-use bar, the rechargeable BM6000 is the direct match. If you used the BM600 bar, the rechargeable BM600 kit is the direct match. Bigger kits like the Nera 30K Fullview push capacity higher still, with screen-based puff counting on top of the OLED.
OLED Display Features on the BM6000
The OLED screen on the front of the kit is the Lost Mary BM6000's distinctive control surface. It activates on each draw and during charging, and shows battery state as a percentage rather than a colour-coded LED. There is no menu to navigate; the screen is read-only feedback. As the battery drops below 20 percent the OLED can blink to flag time-to-charge, and during charging it tracks the climb from current state up to 100 percent. A clear visible e-liquid window on the side of the kit complements the screen so you can read battery and remaining liquid at a glance.
BM6000 Battery Life and Day-to-Day Use
The Lost Mary BM6000 typically lasts a full day per charge - the 1000mAh built-in cell is sized to give the user a full session before charging is needed and to outlast at least one full 12ml refill pack across a typical day's use, with charge time of approximately 30 to 45 minutes from empty. A common question - how many puffs in a Lost Mary BM6000, or how many puffs does a Lost Mary have on this platform? - the answer is up to approximately 6,000 puffs per pack, which is roughly how many puffs a Lost Mary on this platform has across the prefilled pod plus auto-refill container before the pack is spent. Heavier users at higher draw frequencies will charge daily; lighter users may go closer to two days between charges. Charging is via standard USB-C, so the same cable as a phone or tablet works. The OLED display means there is no LED-flash code to interpret for battery state. Inhale activation keeps the workflow simple - take a draw and the kit fires, with no button to hold or settings to navigate.
BM6000 Troubleshooting Tips
What you see |
What to try |
OLED dim or unresponsive on first use |
Plug in USB-C cable for 5 to 10 minutes to wake the battery from shipping mode, then unplug and draw |
No vapour on inhale |
Confirm the silicone airflow plug is removed and the pod is fully seated; try a slower, longer draw to trigger the airflow sensor |
Burnt or harsh taste |
Pause for 30 seconds for fresh e-liquid to wick into the coil; if persistent, the pod is at end of life and the pack needs replacing |
OLED shows low battery early in pack |
Charge to 100 percent from empty; a single full charge cycle restores the battery percentage readout |
E-liquid level not dropping |
Container may not have seated correctly on the pod; reseat the container firmly so the valve engages |
What's in the BM6000 Pod Kit Box
- 1 x Lost Mary BM6000 Pod Kit with 1000mAh built-in rechargeable battery and OLED display
- 1 x 2ml Prefilled Pod with QUAQ mesh coil at 1.1 ohm, nic salt loaded at chosen strength
- 1 x 10ml Auto-Refill Container, factory-sealed with one-way valve
- 1 x User Manual
- USB-C charging cable NOT included; any standard USB-C cable charges the kit
Pros and Things to Know Before Buying
- Pro: 1000mAh USB-C rechargeable battery, no LED-flash code reading
- Pro: OLED display shows live battery percentage and charging progress
- Pro: Auto-refill container removes the manual filling step from refill pod kits
- Pro: 12ml total e-liquid per pack delivers up to approximately 6,000 puffs
- Pro: QUAQ mesh coil holds flavour clarity from first draw to last
- Pro: Same flavour line as the original Lost Mary BM6000 single-use bar
- Pro: Inhale activated, no buttons or settings to configure
- Pro: Removable battery at end-of-life - take to any WEEE recycling point or UK vape retailer with battery recycling
- Things to know: USB-C cable is not included in the box; any standard USB-C cable works
- Things to know: Pods are sealed at the factory and not designed for manual e-liquid topping up; the whole pack is replaced when spent
- Things to know: Puff counts, battery uptime and charge times are approximate and vary by individual draw style, frequency and use pattern
- Things to know: The blue and yellow body design is the BM6000 signature; alternate colourways are not part of the current lineup
- Things to know: Pods do not cross-fit with BM600, Nera 30K, Pro Max 7000, Hawcos Crystal Pro, or Tappo kits
Original: $10.72
-65%$10.72
$3.75More Images
Lost Mary BM6000 Prefilled Pod Vape Kit
Lost Mary 6K Vape Kit
The Lost Mary BM6000 vape kit is the rechargeable, prefilled pod system that replaced the original single-use BM6000 disposable bar withdrawn from UK shelves on 1 June 2025. Vapers also call it the Lost Mary 6000, Lost Mary 6K or BM6000 Lost Mary - all the same kit, paired with a 1000mAh USB-C battery in the signature blue and yellow body, a sealed 2ml prefilled pod and a separate 10ml auto-refill container. As you vape, the 10ml container feeds the pod through a one-way valve, refilling it automatically until the supply runs out. One pack delivers up to approximately 6000 puffs (the BM6000 name reflects the 6000 puffs per refill pack) at 20mg nic salt, with 10mg stocked on a limited selection of flavours for users stepping down. The blue and yellow signature colourway is unique to the BM6000 line and is what Lost Mary search traffic recognises at a glance.
The BM6000 is the post-ban compliant successor to the disposable bar - the kit itself is not being withdrawn, it is the legal rechargeable replacement. This is a prefilled pod platform, not a refillable open-system kit. Pods cannot be manually topped up with bottled e-liquid; the auto-refill container is designed to feed the matched pod inside the same pack. When the pod and container are spent together, you swap the whole refill pack for a fresh one. Browse the Lost Mary BM6000 refill range to pair refills with this kit. For the wider hardware family, see the Lost Mary vape collection.
BM6000 Kit Specifications
Specification |
BM6000 Kit Detail |
Battery capacity |
1000mAh rechargeable, USB Type-C |
Display |
OLED front screen, live battery percentage readout |
Pod capacity |
2ml prefilled pod, UK TPD compliant |
Auto-refill container |
10ml separate container, one-way valve feed |
Total e-liquid per pack |
12ml combined (2ml pod plus 10ml container) |
Puff yield per pack |
Approximately 6,000 puffs at average draw style |
Coil |
QUAQ mesh coil at 1.1 ohm, built into every pod |
Nicotine strength |
20mg nic salt across the range, with 10mg on selected flavours only |
E-liquid base |
MaryLiq nic salt, approximately 50/50 PG/VG |
Activation |
Inhale activated, no buttons or fire keys |
Body colourway |
Blue and yellow Lost Mary BM6000 signature |
Charge time |
Approximately 30 to 45 minutes from empty via USB-C |
Cable included |
No, any standard USB-C charging cable works |
How the BM6000 Auto-Refill System Works
The auto-refill mechanism is what sets the BM6000 apart from a straight prefilled pod kit. Every refill pack ships with two parts: a 2ml prefilled pod with a QUAQ mesh coil inside, and a separate 10ml container of matching MaryLiq nic salt. The container has a sealed one-way valve at the base that locks onto a port on the pod. As e-liquid in the pod runs low, capillary action and gravity draw fresh liquid from the container down into the pod, refilling it automatically while you vape.
You do not fill the pod yourself, and the container cannot be topped up with bottled e-liquid. The container is factory-sealed at the matched nicotine strength and flavour, and the valve only opens once mated with the pod port. This keeps the workflow as simple as a single-use bar (clip on, vape, discard the spent pack together) while delivering the puff count of three or four standard 2ml prefilled pods per pack. When both the pod and the container are spent, the whole pack swaps out for a fresh one.
Charging the BM6000 and Reading the OLED Display
The Lost Mary BM6000 charges via USB-C on the base of the kit. Plug any standard USB-C cable into the port and connect to a 5V phone-grade charger; avoid fast-chargers above 2A as the 1000mAh cell does not need them. A full charge from flat takes approximately 30 to 45 minutes. The OLED display on the front face of the kit lights up while charging and shows the battery percentage climbing in real time, so there is no LED-flash code interpretation to memorise.
Once charging is complete the OLED reads 100 percent and the screen will dim or sleep. Unplug, take a draw, and the kit responds immediately. The OLED screen is the BM6000 feature experienced users tend to flag first; rather than guessing battery state from coloured LED flashes, you see the exact percentage every time you draw on the kit.
BM6000 Pod Fitment and Refill Compatibility
Lost Mary BM6000 pods are platform-specific. They do not cross-fit with the BM600, the Nera 30K, the Pro Max 7000, the Hawcos Crystal Pro, the Tappo, or any other Lost Mary kit. The same goes the other way - those kits use their own pod platforms and are not compatible with BM6000 refills. The 10ml auto-refill container is part of the same matched pack; it is not designed to feed a different pod.
To restock this kit, see the dedicated Lost Mary BM6000 refill collection where every BM6000 flavour ships as pod plus matched 10ml container in one pack.
Flavour Range on the BM6000 Platform
The BM6000 launched with 41 flavour SKUs across fruit, ice, menthol, classic, and drink-inspired profiles - this is the Lost Mary 6K flavours catalogue, mirrored from the original BM6000 single-use bar. The lineup mirrors the original BM6000 single-use bar so users moving across from the pre-ban product find the same flavour they were on. Select the flavour from the variant dropdown above, or scroll to the flavour grid lower down this page to browse by image.
On Lost Mary nicotine content questions: the standard BM6000 nicotine content is 20mg nic salt, with a limited selection of flavours also stocked in 10mg. Stock varies by flavour; out-of-stock variants will appear greyed in the dropdown. For users planning to step nicotine down further, the lowest-strength route is bottled Lost Mary 10ml nic salts at 5mg paired with a refillable MTL pod kit; the BM6000 platform itself runs at 20mg across the full range, with 10mg available on selected flavours only.
[FLAVOURS_SECTION]
BM6000 vs BM600 - Picking the Right Lost Mary Kit
The BM6000 sits in the middle of the current Lost Mary rechargeable kit range. The compact BM600 prefilled pod kit targets approximately 600 puffs per pod, a 750mAh battery, and one 2ml prefilled pod per pack with no separate refill container - simpler, smaller, and lighter on the pocket per session. The BM6000 steps up to approximately 6,000 puffs per pack, the 1000mAh battery, the OLED display, and the 10ml auto-refill container. If you used the original BM6000 single-use bar, the rechargeable BM6000 is the direct match. If you used the BM600 bar, the rechargeable BM600 kit is the direct match. Bigger kits like the Nera 30K Fullview push capacity higher still, with screen-based puff counting on top of the OLED.
OLED Display Features on the BM6000
The OLED screen on the front of the kit is the Lost Mary BM6000's distinctive control surface. It activates on each draw and during charging, and shows battery state as a percentage rather than a colour-coded LED. There is no menu to navigate; the screen is read-only feedback. As the battery drops below 20 percent the OLED can blink to flag time-to-charge, and during charging it tracks the climb from current state up to 100 percent. A clear visible e-liquid window on the side of the kit complements the screen so you can read battery and remaining liquid at a glance.
BM6000 Battery Life and Day-to-Day Use
The Lost Mary BM6000 typically lasts a full day per charge - the 1000mAh built-in cell is sized to give the user a full session before charging is needed and to outlast at least one full 12ml refill pack across a typical day's use, with charge time of approximately 30 to 45 minutes from empty. A common question - how many puffs in a Lost Mary BM6000, or how many puffs does a Lost Mary have on this platform? - the answer is up to approximately 6,000 puffs per pack, which is roughly how many puffs a Lost Mary on this platform has across the prefilled pod plus auto-refill container before the pack is spent. Heavier users at higher draw frequencies will charge daily; lighter users may go closer to two days between charges. Charging is via standard USB-C, so the same cable as a phone or tablet works. The OLED display means there is no LED-flash code to interpret for battery state. Inhale activation keeps the workflow simple - take a draw and the kit fires, with no button to hold or settings to navigate.
BM6000 Troubleshooting Tips
What you see |
What to try |
OLED dim or unresponsive on first use |
Plug in USB-C cable for 5 to 10 minutes to wake the battery from shipping mode, then unplug and draw |
No vapour on inhale |
Confirm the silicone airflow plug is removed and the pod is fully seated; try a slower, longer draw to trigger the airflow sensor |
Burnt or harsh taste |
Pause for 30 seconds for fresh e-liquid to wick into the coil; if persistent, the pod is at end of life and the pack needs replacing |
OLED shows low battery early in pack |
Charge to 100 percent from empty; a single full charge cycle restores the battery percentage readout |
E-liquid level not dropping |
Container may not have seated correctly on the pod; reseat the container firmly so the valve engages |
What's in the BM6000 Pod Kit Box
- 1 x Lost Mary BM6000 Pod Kit with 1000mAh built-in rechargeable battery and OLED display
- 1 x 2ml Prefilled Pod with QUAQ mesh coil at 1.1 ohm, nic salt loaded at chosen strength
- 1 x 10ml Auto-Refill Container, factory-sealed with one-way valve
- 1 x User Manual
- USB-C charging cable NOT included; any standard USB-C cable charges the kit
Pros and Things to Know Before Buying
- Pro: 1000mAh USB-C rechargeable battery, no LED-flash code reading
- Pro: OLED display shows live battery percentage and charging progress
- Pro: Auto-refill container removes the manual filling step from refill pod kits
- Pro: 12ml total e-liquid per pack delivers up to approximately 6,000 puffs
- Pro: QUAQ mesh coil holds flavour clarity from first draw to last
- Pro: Same flavour line as the original Lost Mary BM6000 single-use bar
- Pro: Inhale activated, no buttons or settings to configure
- Pro: Removable battery at end-of-life - take to any WEEE recycling point or UK vape retailer with battery recycling
- Things to know: USB-C cable is not included in the box; any standard USB-C cable works
- Things to know: Pods are sealed at the factory and not designed for manual e-liquid topping up; the whole pack is replaced when spent
- Things to know: Puff counts, battery uptime and charge times are approximate and vary by individual draw style, frequency and use pattern
- Things to know: The blue and yellow body design is the BM6000 signature; alternate colourways are not part of the current lineup
- Things to know: Pods do not cross-fit with BM600, Nera 30K, Pro Max 7000, Hawcos Crystal Pro, or Tappo kits
Product Information
Product Information
Shipping & Returns
Shipping & Returns
Description
Lost Mary 6K Vape Kit
The Lost Mary BM6000 vape kit is the rechargeable, prefilled pod system that replaced the original single-use BM6000 disposable bar withdrawn from UK shelves on 1 June 2025. Vapers also call it the Lost Mary 6000, Lost Mary 6K or BM6000 Lost Mary - all the same kit, paired with a 1000mAh USB-C battery in the signature blue and yellow body, a sealed 2ml prefilled pod and a separate 10ml auto-refill container. As you vape, the 10ml container feeds the pod through a one-way valve, refilling it automatically until the supply runs out. One pack delivers up to approximately 6000 puffs (the BM6000 name reflects the 6000 puffs per refill pack) at 20mg nic salt, with 10mg stocked on a limited selection of flavours for users stepping down. The blue and yellow signature colourway is unique to the BM6000 line and is what Lost Mary search traffic recognises at a glance.
The BM6000 is the post-ban compliant successor to the disposable bar - the kit itself is not being withdrawn, it is the legal rechargeable replacement. This is a prefilled pod platform, not a refillable open-system kit. Pods cannot be manually topped up with bottled e-liquid; the auto-refill container is designed to feed the matched pod inside the same pack. When the pod and container are spent together, you swap the whole refill pack for a fresh one. Browse the Lost Mary BM6000 refill range to pair refills with this kit. For the wider hardware family, see the Lost Mary vape collection.
BM6000 Kit Specifications
Specification |
BM6000 Kit Detail |
Battery capacity |
1000mAh rechargeable, USB Type-C |
Display |
OLED front screen, live battery percentage readout |
Pod capacity |
2ml prefilled pod, UK TPD compliant |
Auto-refill container |
10ml separate container, one-way valve feed |
Total e-liquid per pack |
12ml combined (2ml pod plus 10ml container) |
Puff yield per pack |
Approximately 6,000 puffs at average draw style |
Coil |
QUAQ mesh coil at 1.1 ohm, built into every pod |
Nicotine strength |
20mg nic salt across the range, with 10mg on selected flavours only |
E-liquid base |
MaryLiq nic salt, approximately 50/50 PG/VG |
Activation |
Inhale activated, no buttons or fire keys |
Body colourway |
Blue and yellow Lost Mary BM6000 signature |
Charge time |
Approximately 30 to 45 minutes from empty via USB-C |
Cable included |
No, any standard USB-C charging cable works |
How the BM6000 Auto-Refill System Works
The auto-refill mechanism is what sets the BM6000 apart from a straight prefilled pod kit. Every refill pack ships with two parts: a 2ml prefilled pod with a QUAQ mesh coil inside, and a separate 10ml container of matching MaryLiq nic salt. The container has a sealed one-way valve at the base that locks onto a port on the pod. As e-liquid in the pod runs low, capillary action and gravity draw fresh liquid from the container down into the pod, refilling it automatically while you vape.
You do not fill the pod yourself, and the container cannot be topped up with bottled e-liquid. The container is factory-sealed at the matched nicotine strength and flavour, and the valve only opens once mated with the pod port. This keeps the workflow as simple as a single-use bar (clip on, vape, discard the spent pack together) while delivering the puff count of three or four standard 2ml prefilled pods per pack. When both the pod and the container are spent, the whole pack swaps out for a fresh one.
Charging the BM6000 and Reading the OLED Display
The Lost Mary BM6000 charges via USB-C on the base of the kit. Plug any standard USB-C cable into the port and connect to a 5V phone-grade charger; avoid fast-chargers above 2A as the 1000mAh cell does not need them. A full charge from flat takes approximately 30 to 45 minutes. The OLED display on the front face of the kit lights up while charging and shows the battery percentage climbing in real time, so there is no LED-flash code interpretation to memorise.
Once charging is complete the OLED reads 100 percent and the screen will dim or sleep. Unplug, take a draw, and the kit responds immediately. The OLED screen is the BM6000 feature experienced users tend to flag first; rather than guessing battery state from coloured LED flashes, you see the exact percentage every time you draw on the kit.
BM6000 Pod Fitment and Refill Compatibility
Lost Mary BM6000 pods are platform-specific. They do not cross-fit with the BM600, the Nera 30K, the Pro Max 7000, the Hawcos Crystal Pro, the Tappo, or any other Lost Mary kit. The same goes the other way - those kits use their own pod platforms and are not compatible with BM6000 refills. The 10ml auto-refill container is part of the same matched pack; it is not designed to feed a different pod.
To restock this kit, see the dedicated Lost Mary BM6000 refill collection where every BM6000 flavour ships as pod plus matched 10ml container in one pack.
Flavour Range on the BM6000 Platform
The BM6000 launched with 41 flavour SKUs across fruit, ice, menthol, classic, and drink-inspired profiles - this is the Lost Mary 6K flavours catalogue, mirrored from the original BM6000 single-use bar. The lineup mirrors the original BM6000 single-use bar so users moving across from the pre-ban product find the same flavour they were on. Select the flavour from the variant dropdown above, or scroll to the flavour grid lower down this page to browse by image.
On Lost Mary nicotine content questions: the standard BM6000 nicotine content is 20mg nic salt, with a limited selection of flavours also stocked in 10mg. Stock varies by flavour; out-of-stock variants will appear greyed in the dropdown. For users planning to step nicotine down further, the lowest-strength route is bottled Lost Mary 10ml nic salts at 5mg paired with a refillable MTL pod kit; the BM6000 platform itself runs at 20mg across the full range, with 10mg available on selected flavours only.
[FLAVOURS_SECTION]
BM6000 vs BM600 - Picking the Right Lost Mary Kit
The BM6000 sits in the middle of the current Lost Mary rechargeable kit range. The compact BM600 prefilled pod kit targets approximately 600 puffs per pod, a 750mAh battery, and one 2ml prefilled pod per pack with no separate refill container - simpler, smaller, and lighter on the pocket per session. The BM6000 steps up to approximately 6,000 puffs per pack, the 1000mAh battery, the OLED display, and the 10ml auto-refill container. If you used the original BM6000 single-use bar, the rechargeable BM6000 is the direct match. If you used the BM600 bar, the rechargeable BM600 kit is the direct match. Bigger kits like the Nera 30K Fullview push capacity higher still, with screen-based puff counting on top of the OLED.
OLED Display Features on the BM6000
The OLED screen on the front of the kit is the Lost Mary BM6000's distinctive control surface. It activates on each draw and during charging, and shows battery state as a percentage rather than a colour-coded LED. There is no menu to navigate; the screen is read-only feedback. As the battery drops below 20 percent the OLED can blink to flag time-to-charge, and during charging it tracks the climb from current state up to 100 percent. A clear visible e-liquid window on the side of the kit complements the screen so you can read battery and remaining liquid at a glance.
BM6000 Battery Life and Day-to-Day Use
The Lost Mary BM6000 typically lasts a full day per charge - the 1000mAh built-in cell is sized to give the user a full session before charging is needed and to outlast at least one full 12ml refill pack across a typical day's use, with charge time of approximately 30 to 45 minutes from empty. A common question - how many puffs in a Lost Mary BM6000, or how many puffs does a Lost Mary have on this platform? - the answer is up to approximately 6,000 puffs per pack, which is roughly how many puffs a Lost Mary on this platform has across the prefilled pod plus auto-refill container before the pack is spent. Heavier users at higher draw frequencies will charge daily; lighter users may go closer to two days between charges. Charging is via standard USB-C, so the same cable as a phone or tablet works. The OLED display means there is no LED-flash code to interpret for battery state. Inhale activation keeps the workflow simple - take a draw and the kit fires, with no button to hold or settings to navigate.
BM6000 Troubleshooting Tips
What you see |
What to try |
OLED dim or unresponsive on first use |
Plug in USB-C cable for 5 to 10 minutes to wake the battery from shipping mode, then unplug and draw |
No vapour on inhale |
Confirm the silicone airflow plug is removed and the pod is fully seated; try a slower, longer draw to trigger the airflow sensor |
Burnt or harsh taste |
Pause for 30 seconds for fresh e-liquid to wick into the coil; if persistent, the pod is at end of life and the pack needs replacing |
OLED shows low battery early in pack |
Charge to 100 percent from empty; a single full charge cycle restores the battery percentage readout |
E-liquid level not dropping |
Container may not have seated correctly on the pod; reseat the container firmly so the valve engages |
What's in the BM6000 Pod Kit Box
- 1 x Lost Mary BM6000 Pod Kit with 1000mAh built-in rechargeable battery and OLED display
- 1 x 2ml Prefilled Pod with QUAQ mesh coil at 1.1 ohm, nic salt loaded at chosen strength
- 1 x 10ml Auto-Refill Container, factory-sealed with one-way valve
- 1 x User Manual
- USB-C charging cable NOT included; any standard USB-C cable charges the kit
Pros and Things to Know Before Buying
- Pro: 1000mAh USB-C rechargeable battery, no LED-flash code reading
- Pro: OLED display shows live battery percentage and charging progress
- Pro: Auto-refill container removes the manual filling step from refill pod kits
- Pro: 12ml total e-liquid per pack delivers up to approximately 6,000 puffs
- Pro: QUAQ mesh coil holds flavour clarity from first draw to last
- Pro: Same flavour line as the original Lost Mary BM6000 single-use bar
- Pro: Inhale activated, no buttons or settings to configure
- Pro: Removable battery at end-of-life - take to any WEEE recycling point or UK vape retailer with battery recycling
- Things to know: USB-C cable is not included in the box; any standard USB-C cable works
- Things to know: Pods are sealed at the factory and not designed for manual e-liquid topping up; the whole pack is replaced when spent
- Things to know: Puff counts, battery uptime and charge times are approximate and vary by individual draw style, frequency and use pattern
- Things to know: The blue and yellow body design is the BM6000 signature; alternate colourways are not part of the current lineup
- Things to know: Pods do not cross-fit with BM600, Nera 30K, Pro Max 7000, Hawcos Crystal Pro, or Tappo kits
