Lost Mary Tappo Pro Pod Kit

Lost Mary Tappo Pro Kit

The Lost Mary Tappo Pro is the upgraded pen-style prefilled pod kit on the Tappo platform - a slim rechargeable kit with a 750mAh built-in battery, USB-C charging in approximately 50 minutes, and a 2ml prefilled pod that delivers up to approximately 600 puffs at 20mg nic salt. Each kit ships in one of four colourways paired with a Lost Mary flavour pod: Strawberry Ice, Blueberry Sour Raspberry, Lemon and Lime, or Watermelon. The Tappo Pro pod kit signature USP is cross-compatibility - the same 2ml pod platform clicks into the original Lost Mary Tappo kit, the ELFA Pro, and the Elf Bar 600 V2, which puts this kit in the most cross-platform position of any Lost Mary pen-style device. The Tappo Pro is inhale activated with a buttonless body, no screen, no settings and no menu.

This kit is also called the Lost Mary Tappo Pro Pod Kit, the Tappo Pro Vape, the Lost Mary Tappo starter kit, or simply the Tappo - all the same rechargeable pen-style device. Common misspell "Lost Mary Tappi" routes here. This page covers the Tappo Pro kit body itself - the device, the 750mAh battery, the LED behaviour, set-up and the cross-fit with ELFA Pro and Elf Bar 600 V2. For the full Tappo flavour roster and 2-pack pod refills, head to the Tappo refill pods collection. For the wider Lost Mary lineup, head to the Lost Mary brand hub.

Tappo Pro Pod Kit Specifications

Hardware specs for the Tappo Pro prefilled pod vape kit. Figures from Lost Mary, verified against the device.

How the Tappo Pro Pod Kit Works

The Tappo Pro is a closed prefilled pod system, not a refillable open-tank kit. The 2ml pod ships pre-loaded with 20mg nic salt and a sealed QUAQ mesh coil - no priming wait beyond a few seconds, no coil to thread, no e-liquid to handle. The kit is inhale activated - draw on the mouthpiece and it fires. No buttons, no temperature control, no airflow ring, no menu. When the LED on the base flashes low, plug a USB-C cable in - full charge takes around 50 minutes. When the pod runs dry, it pulls off the magnetic top connector and a fresh one clicks on. The magnetic pod connector is shared with the ELFA Pro and Elf Bar 600 V2, unlocking cross-fit across three kit ranges.

Setting Up the Tappo Pro

1. Open the box and lift out the Tappo Pro kit body and the prefilled pod
2. Pull the silicone plug off the mouthpiece of the pod
3. Peel any stickers off the bottom of the kit body
4. Slot the pod onto the top of the kit - the magnetic connector pulls it into place
5. Wait a few seconds for the QUAQ mesh coil to soak in nic salt e-liquid
6. Draw on the mouthpiece - the device is inhale activated, no buttons
7. When the LED flashes low, plug a USB-C cable into the base to charge
8. When the pod is dry, pull it off and click in a fresh Tappo, ELFA Pro or Elf Bar 600 V2 pod

The Tappo Pro ships ready to vape straight out of the box. No coil install, no e-liquid mixing, no setting changes. The first pod ships in the kit so the device is good to go the moment it arrives.

Tappo Pro Battery Life and 50-Minute USB-C Charging

The Tappo Pro runs on a 750mAh built-in rechargeable battery, charged through the USB Type-C port on the base of the kit body. No USB-C cable in the box; any standard USB-C cable works. From an empty battery the Tappo Pro reaches a full charge in approximately 50 minutes at 5V/2A; wall adaptor output and cable quality both affect the figure. The cell outlasts a single 2ml pod, so most users charge at pod-swap.

The LED next to the USB-C port confirms charging status throughout the cycle. The battery is removable at end-of-life - take the device to a UK vape retailer with battery recycling or a WEEE point.

Cross-Compatibility with ELFA Pro and Elf Bar 600 V2

Cross-compatibility is the Tappo Pro signature feature - the reason experienced vapers pick this over a closed single-brand kit. The Tappo Pro magnetic connector accepts pods from three ranges: Lost Mary Tappo, ELFA Pro, and Elf Bar 600 V2. All four sit on the Heaven Gifts shared platform - same connector, 2ml cap, 20mg strength. A single Tappo Pro kit body unlocks three pod libraries without changing the device - the broadest cross-fit in the 2026 Lost Mary lineup. Pods click on through the same magnetic connector regardless of brand.

Cross-fit stays within Heaven Gifts: a Tappo pod does not fit a Vaporesso XROS, OXVA Xlim, Hayati Pro Ultra Plus, Lost Mary BM600 or any other platform. It is a Heaven Gifts design choice (Elf Bar, Lost Mary and ELFA share the same parent), not an industry standard. If you own any of the three compatible kits, the kit doubles as a backup body for your existing pod stash.

Tappo Pro Pod Fitment

The Tappo Pro magnetic connector takes Lost Mary Tappo refill pods (2-pack) as the native pod, plus ELFA Pro and Elf Bar 600 V2 pods. Every compatible pod is a 2ml sealed unit with a built-in QUAQ mesh coil. Other Lost Mary kits (BM600, BM6000, Nera 30K, Pro Max 7000, Hawcos Crystal Pro) run dedicated platforms and do not cross-fit. For the full Tappo flavour roster, multipacks and live stock, head to the Tappo refill pods collection.

Tappo Pro Flavours

The Tappo Pro ships in four colourways, each paired with a popular flavour pod: Strawberry Ice, Blueberry Sour Raspberry, Lemon and Lime, and Watermelon. The wider Tappo platform stocks 20+ flavours across fruit, ice, menthol and tropical profiles - full roster on the Tappo refill pods collection, where pods ship as 2-packs ready to click on once the starter pod runs dry.

[FLAVOURS_SECTION]

Tappo Pro vs BM600 - Which Lost Mary Kit Is Right

The Tappo Pro and the Lost Mary BM600 are both 600-puff prefilled kits, but the form factor and pod platform differ. It is a slim pen-style kit on the Heaven Gifts platform - cross-fits Tappo, ELFA Pro and Elf Bar 600 V2 pods, 750mAh battery, around 50-minute charge. The BM600 is bar-shaped on a dedicated Lost Mary platform - only fits BM600 refill pods, also 750mAh, also around 600 puffs per pod. Both run 20mg nic salt with QUAQ-style mesh coils, both inhale activated with no buttons.

Pick the Tappo Pro for cross-brand pod flexibility, the pen-style form factor and the wider flavour catalogue. Pick the BM600 for the familiar bar shape from the legacy single-use catalogue and a single-brand closed system. The two kits use different pod platforms - pods are not interchangeable.

Tappo Pro Day-to-Day Use

The Tappo Pro suits vapers wanting a slim pen-style rechargeable with flexibility across three pod ranges. A single 2ml pod delivers up to approximately 600 puffs at 20mg nic salt before running dry. Pod life varies by draw style and usage. The pen-style body pockets easily and the four colourways match the starter flavour pod. The QUAQ mesh coil pulls flavour cleanly throughout. The MTL / RDL draw is loose enough for ex-smokers but tight enough for a focused mouth-to-lung hit.

Pod swapping is a single magnetic-click - the spent pod pulls off, a fresh Tappo, ELFA Pro or Elf Bar 600 V2 pod clicks on. No bottles to carry, no coils to change, no priming wait. A burnt note from a Tappo Pro pod usually signals end-of-life on that 600-puff window - swap to a fresh pod and full flavour returns.

What's in the Tappo Pro Box

• 1 x Lost Mary Tappo Pro Pod Kit with 750mAh built-in rechargeable battery
• 1 x 2ml Prefilled Pod loaded with 20mg Lost Mary nic salt e-liquid (flavour matched to chosen colourway)
• 1 x User Manual
• USB-C charging cable NOT included; any standard USB-C cable charges the kit

Pros and Things to Know Before Buying

• Pro: Cross-fits three pod kit ranges - Tappo, ELFA Pro and Elf Bar 600 V2 - the broadest cross-platform in the Lost Mary lineup
• Pro: 750mAh built-in rechargeable battery via USB-C, full charge in approximately 50 minutes
• Pro: QUAQ mesh coil holds flavour clarity from first draw to last across the 2ml pod
• Pro: Slim pen-style body matches a pocket without bulk
• Pro: Inhale activated, no buttons, no menu, no settings - works straight out of the box
• Pro: Four colourways pair with a popular starter flavour pod for instant recognition
• Pro: 20mg nic salt strength matches what most ex-smokers reach for first
• Pro: Removable battery at end-of-life - take to a UK WEEE recycling point or vape retailer with battery recycling
• Things to know: USB-C cable is not included in the box; any standard USB-C cable works
• Things to know: Pods are sealed at the factory and not designed for manual e-liquid topping up - this is a prefilled pod platform, not a refillable open-tank kit
• Things to know: Tappo pods run at 20mg nic salt only on the Tappo platform - no 0mg, 5mg or 10mg Tappo pod option exists
• Things to know: Puff counts, battery uptime and charge times are approximate and vary by individual draw style and usage
• Things to know: Cross-fit is limited to Heaven Gifts platform pods (Tappo, ELFA Pro, Elf Bar 600 V2) - the Tappo Pro does not accept BM600, BM6000, Nera, Pro Max, Hawcos, OXVA Xlim, Vaporesso XROS or other non-Heaven Gifts pods